Fireproof sliding gates

Coolfire – NS Fireproof sliding gate EI120
One of the most cost-effective solutions for securing the openings at the boundary of the fire section against fire is a horizontally sliding, single and double leaf, even telescopically openable Fireproof sliding gate. It is only for protection against fire, it is not suitable for daily use, multiple opening and closing.
Benefits:
- The passage between two adjacent rooms, which are bounded by a fire section, can be ensured by using a Fireproof sliding gate, with fire emergency closing
- Can be mounted with personal entrance door 1250 * 2150mm, which can be glazed with 300 * 400mm glass panel and can be equipped with panic function
- Optional: smoke detection unit, emergency switch
- Available with single and double leaf design that slides to the side, or with single and double leaf design that telescopically slides in case of lack of space.
Techincal data, applicable sizes, space requirements
Coolfire-NS1 Single leaf sliding gate (EI120) | ![]() |
Maximum opening size | 4000 x 4000mm |
Side requirements | |
-weight chamber is located on the opening side | Opening width + 240 mm on the opening side 50mm on the closing side |
-weight chamber is located on the closing side | Opening width + 180 mm on the opening side 180mm on the closing side |
Minimum bridging height | 250 mm 200 mm in special cases |
Coolfire-NS2 Double leaf sliding gate (EI120) | ![]() |
Maximum opening size | 8400 x 4000mm |
Side space requirements | Half of the opening width+150mm on one side Half of the opening width+175mm on the other side |
Minimum bridging height | 250 mm 200 mm in special cases |
Coolfire-NS1-T one-way telescopic sliding gate (EI120) | ![]() |
Maximum opening size | 4200 x 4000mm |
Side requirements needs (weight chamber is located on the opening side) | Half of the opening width+150mm on the opening side 180mm on the closing side |
Minimum bridging height | 350 mm |
Coolfire-NS2-T Two-way telescopic sliding gate (EI120) | ![]() |
Maximum opening size | 8400 x 4000mm |
Side requirements needs, on both sides | A quarter of the opening width +245 mm |
Minimum bridging height | 350 mm |
Integrated in passageway door | 1100 x 2100 mm |
Looking glass panel | 300 x 400 mm |
Application:
Openings in the fire section partitioning wall of factories, plants, warehouses, underground garages, through which car and forklift traffic must be provided
Look:
The door leaf operates on a suspended guide rail and is kept open by a 24V magnet. In the event of a fire, the fire alarm system sends a signal and the magnet releases, the door leaf closes due to a counterweight system. It can be opened by hand, the magnet keeps it open again. In special cases, with a deviation permission, the sliding gate can be mounted in a sandwich-structured composite or plasterboard opening, using a steel support structure
Ral colours:
It comes with RA: 7035 by default, on request it can be ordered painted in a custom colour. RAL 7035, 1013, 5010, 7016, 9006, 9010, RAL 1001, 3003, 5009, 5012, 5015, 5024, 6005, 6011, 7001, 7031, 7032, 8019, 9001, 9005, 9016
Extras:
It can also be used in extra large sizes, advance consultation if required